Belt type concrete batching plant for sale - Haomei Machine

Belt type concrete batching plant for sale usually has high mixing efficiency, capacity and quality, and are widely used in commercial concrete company and large construction project. The mixing capacity of belt conveyor concrete batching plant is 75-240m3/h, the mixing quality is better than skip type concrete batching plant.



The production process of belt type concrete batching plant for sale are:
1. Land site
Keep the land site of the belt type concrete batching plant to be clean, the drainage is smooth, and the signal is connected smoothly;
2, loading system
(1) The aggregate should be prevented from entering the operating mechanism;
(2) Generally, sand and cement cannot be fed in the same pipe groove;
(3) The materials in the hopper, pipe trough and other parts should be unloaded every time, and should not be reserved for the next feeding.
3, feeding
(1) It is possible to adopt one feeding and multiple feeding. One feeding is to put the materials into the concrete mixer according to a certain process sequence, but it is not allowed to cast cement first to avoid sticking;
(2) In order to prevent the cement from being wrapped by water to form a cement ball in one feeding, the cement and sand should be stirred first, so that the cement is dispersed and then watered;
(3) Mixing concrete for multiple times, its feeding operation is more complicated, and it needs special treatment in the belt type concrete batching plant and mixing building to realize.
4, running
(1) It is necessary to control the measurement accuracy and mixing time to ensure that the process requirements are met;
(2) Check abnormalities and faults, such as whether there is leakage of water or slurry at the discharge port, etc. If there are any abnormalities and failures, repair them in time.
5, shutdown
(1) The concrete must be cleaned before shutdown;
(2) Before the machine is shut down after the completion of the work, use a small amount of stone to wash the concrete mixer with water;
(3) Clean up the mixing site. When sudden power failure or downtime occurs, care should be taken to clean the concrete in the concrete mixing machine in time.
6, security
Anyone must follow the operating procedures and safety precautions to ensure safe production.