Mechanical performance of concrete boom pump

Concrete boom pump is a kind of mechanical equipment used by many construction parties at present, which can greatly improve the efficiency of construction. To ensure that the construction tasks can be completed on time and in accordance with the construction process, how can the mechanical performance requirements of the concrete pump truck be met? This is a topic that many construction parties are very concerned about.
　　


The concrete boom pump truck operation needs to be carried out in accordance with the corresponding operating rules during construction. For example, the size of sand and gravel, the cement number and the mix ratio should meet the requirements of the mechanical performance of the concrete pump truck in accordance with the requirements of the factory instructions. The requirements for using concrete pumps usually have the following points:
　　
1, The parking brake and locking brake of the concrete boom pump should be used at the same time. The tires should be wedge tight. The water supply should be normal and the water tank should be filled with clean water. There should be no debris in the hopper. The lubrication points should be lubricated normally.　
2, The bolts of each part of the concrete boom pump should be tightened, and the pipe joints should be tightened. The sealing protection device should be complete and reliable.　
3, At the beginning of each part, the adjustment handle, handwheel, control rod, cock, etc. should be correct.　
4, Prepare cleaning pipes, cleaning supplies and other related devices. Before operation, lubricate the pipes with the prepared cement mortar, and leave the pipes for irrelevant personnel.　
5, The outriggers should be fully extended and firmly supported. Do not start the boom before being fixed. The placing boom can only rotate after raising the support. The spreading boom should be carried out in order. It is strictly forbidden to use the boom to lift or drag objects.