Dry Type Concrete Batching Plant

Dry type concrete batching plants are economical, and their installation is much simpler than large scale concrete batching plants. The dry type concrete mixing plant is mainly composed of a concrete batching machine, a belt conveyor, a cement silo, and a screw, and is not equipped with a concrete mixer, so the equipment cost is greatly reduced. Dry type concrete batching plant has been widely used in construction sites and is easy to operate. Since the concrete produced is used by the concrete itself, dry type concrete mixing plants are still more popular.

Dry type concrete batching plant use electronic scales or manual scales to weigh sand, gravel and cement. After this, they will be discharged into the chute, from which they are discharged into the tank of the concrete mixer truck. At the same time, the water is also metered gravimetrically or volumetrically and discharged through the same charging chute into the concrete mixer truck, which then mixes all the materials for a minimum of 70 to 100 revolutions during transport to the job site. After understand the working process of dry concrete batching plant, we can find that the mixing system is much simple than wet type concrete batching plant, without water added, the dry mixed concrete mixture can be transferred in long distance without quality affected.

The advantages of dry type concrete batching plant are as follows: low configuration, fast solidification, transported to the working face, and then transported to the construction site by concrete tanker, economical cost and fast construction speed. Dry concrete batching plant has high bond strength, concrete process and simple operation. Because the concrete produced is used by itself, it is fed by machinery or manually, and does not contain water. In addition, according to the design ratio requirements, stir evenly. The number of external additives and the like is relatively small.