Hot selling hydraulic brick maker machine

Haomei offer hot selling hydraulic brick maker machine with manual or automatic control and can produce various concrete bricks and blocks. Most of the brick making machines work in the harsh environment such as sand, gravel, rain and snow. Their technical conditions will inevitably decline faster than other machines. The coordination of parts will appear different degrees of looseness, wear, corrosion and scaling. The coordination properties of various connecting parts, the mutual position relationship between parts and the coordination of mechanism work will be affected to different degrees, resulting in their power performance indexes such as performance, economy and reliability decrease, and even cause machine accidents.



What problems should be paid attention to in the production of concrete brick making machine? In order to ensure the smooth production of brick making machine, make the equipment play a great efficiency and reduce the failure probability.
1. Check the tightness of the bolts of each part of the brick maker machine every day, especially the vibrator part. The vibration motor skin plate needs to be checked frequently. If there is wear, slip and other phenomena, it should be replaced in time. If there is too much wear on the belt, it should be replaced in time;
2. The important thing in the brick making machine production is the mold. The mold affects the quality of the finished brick. During the production, the mold shall be kept clean and free of sticking materials. The inspection shall be carried out at any time. If the wear degree of the mold is serious, the mold shall be replaced. During the replacement, it is necessary to hang the mold with ropes to prevent the sudden sliding;
3. Hydraulic system is adopted for cement brick making machine equipment, which must be kept clean. It is strictly prohibited to mix impurities. The oil level shall be checked. When using, it is necessary to ensure that the added oil is clean and prevent the generated iron chips from entering the bottom of the oil tank;
4. When the production of the hydraulic brick maker machine is stopped, the inside and outside of the equipment shall be cleaned to ensure the cleanness of the equipment.