Interlocking Bricks Machine Price

When refers to interlocking bricks machine price, we have to mention the structural characteristics of it. Interlocking brick making machine adopt classic vibration mode, especially suitable for the production of high-strength blocks, standard bricks, etc. The molding cycle is short and the efficiency is high. The special high-efficiency vibrator for the vibrating machine has a strong excitation force and a better compaction effect of the product.

The forming volume of interlocking bricks machine is large, and it can produce a variety of cement products with a wide range of production. Forced mechanical positioning, fast and uniform cloth, accurate products and good consistency. Fully automatic PLC control system help interlocking blocks machine to achieve interactive man-machine interface, the control system is equipped with safety logic control, and has the function of production program and fault diagnosis display. The interlocking bricks machine price and production cost is low, and the raw materials can fully use various waste residues such as sand, stone powder, fly ash, and slag.

 
The ex-factory interlocking bricks machine have been tested in the factory in accordance with relevant regulations, but due to long-distance transportation and long-term placement, the following inspections should be carried out when installing the interlocking brick machine:
1, Check whether the brick machine is damaged or deformed during transportation (especially the hydraulic pipeline).
2, Check whether the fasteners in the main parts of the brick making machine are loose.
3, Check the reducer. Whether the oil cylinder and each lubrication point of the vibration table are refueled as required, and whether the oil quantity is appropriate.
4, In addition, the interlocking brick making machine should be thoroughly wiped. Before the test machine, the relative sliding parts of each moving part should be lubricated according to the regulations. If the machine needs to be disassembled due to transportation, it can be divided into forming device, plate feeding device, feeding device, brick discharging device, stacking device, phase electric control device, etc., which should be assembled in place according to the assembly relationship during installation.