The Importance of Portable Concrete Pump

In the portable concrete pump truck, the chassis is particularly important. Sinotruk and Shaanxi Automobile are dedicated chassis suppliers for most concrete pump truck manufacturers. Sinotruk chassis is positioned at a mid-range price, but its configuration is relatively rich, whether it is the load-bearing capacity of the engine or the concrete pump truck that will be off the assembly line in the later stage. Other performances are pretty good. The fuel injection volume and fuel injection time of the EFI engine are controlled by the on-board computer, and the operation is stable.
 

Since the electronic injection device of the concrete boom pump truck is controlled by a computer, the antenna on the truck should be placed in an obvious place when pumping, and should not be blocked. It is not suitable to use a high-power radio transmitter. For example, radio walkie-talkies and stereos above 10W should be kept away from high-voltage power systems. The EFI device of concrete pump truck cannot be disassembled blindly, because the EFI device is a high-tech product and must be professionally repaired. When testing, use special equipment and operate in accordance with the regulations to avoid damage. After the concrete pump truck uses the high and low pressure switch, when the high pressure mode is selected for pumping, when the concrete pump trucks the concrete into the mold horizontal pipe or the placing boom, the end hoses should be moved evenly to prevent the concrete from accumulating , Increase the pressure and feed resistance and cause the tube to burst. When pouring wall panels and grooves, the nozzle should be placed in the middle of the groove and groove formwork, and the slurry should be used for pouring. When the concrete is poured to the final stage, the concrete pump truck shall be stopped in stages.
 
Haomei Machinery has been engaged in the manufacture of portable concrete pump equipment for more than 20 years, with a wide variety of concrete equipment and high-quality products. The products are exported to more than 30 countries and regions such as Europe, Asia, Southeast Asia, South America, Africa and Oceania. We are committed to providing customers with good pre-sales, in-sales and after-sales services, so that our concrete equipment can bring customers a good construction experience.