The skip type concrete mixing plant equipment is an indispensable mixing equipment for the construction of roads, highways, and high-rise buildings. Skip type concrete batching plant takes little land for set up equipment use, and then it is more complicated to find a suitable concrete mixing plant manufacturer. Therefore, the factory will take strict quality inspection of each concrete mixing plant equipment to ensure that each set of equipment sent out will perform well. The skip hopper lifting device on the concrete mixing plant is relatively easy to damage. Here we introduce the correct use and maintenance of the skip hopper lifting device of concrete mixing plant.
1. In the initial stage of debugging, the lowest position for lifting hopper of the skip type concrete batching plant should be ensured, and the lowest position where the bucket is dropped is the minimum limit that the lifting wire rope is not loosened. The highest position of the lifting bucket is that the aggregate can be poured into the mixing drum.
2. The determination of lifting bucket position is all set by the upper and lower limits, and there is double limit protection.
3. During the first week of the operation of the skip type concrete mixing plant, check the looseness of the connection bolts of the limit each day.
4. Manually raise and lower the lift bucket before each formal operation to determine whether the limit switch action is flexible and reliable.
5. Check whether the second limit switch is flexible and reliable once a day.
6. Check if the limit limit is reliable once a week.
Copyright Haomei machinery equipment CO., LTD. all rights reserved. Sitemap Product Index Technical Support: HAOMEI