Site of Asphalt Plants For Sale

The factors affecting the site selection of the asphalt plants for sale are very complex, and three main requirements need to be considered, such as transportation distance, site, and environmental protection.

Transportation distance
1. In order to ensure the paving temperature and transportation economy, the asphalt plants for sale and the construction site should not be too large. The location selected for the asphalt mixing plant should be close to the roadbed of the bidding section, and the supply of finished asphalt mixture to the adjacent bidding section should be considered. According to the environmental traffic and other factors, the radiation range should not exceed 50-100KM.
2. The main raw materials of the asphalt plants are sand, stone, powder and asphalt, and the fuel is heavy oil or natural gas. The demand distribution of the construction site and the source of materials, supply capacity, transportation conditions and material yard distribution should be comprehensively considered. So that the comprehensive distance is very economical.

Site
1. The topography is basically flat, the geological structure is free from fractures, landslides and other geological disasters.
2. The site needs to be located next to the main road, and choose to be located at the intersection of the two main lines, so as to organize the transportation of raw materials and mixed finished products, improve transportation efficiency and reduce transportation costs. In addition, if there is a convenient water transportation system nearby, it is also one of the influencing factors of site selection planning.
3. The nearby industrial power distribution stations and municipal gas supply pipelines will restrict the distribution and economic benefits of the asphalt mixing plant.

Environmental protection
1. The site selection of asphalt plants for sale should avoid environmentally sensitive areas (upstream areas such as rivers, slope protection, reservoirs, drinking water sources, nature reserves and other areas that require special protection), and avoid concentrated residential areas.
2. When planning the layout, it should be selected on the downwind side of the main wind in the industrial area and the concentrated residential area. The factory boundary should be 500m away from the concentrated residential area, and avoid the main road and the concentrated living area of the residents, so as to reduce the interaction between the transportation vehicles and the traffic in and out of the city.