Automatic Hydraulic Brick Making Machine

Automatic hydraulic brick making machine is regard as a type of advanced brick manufacturer equipment on the market. It can save labour while improve the productivity with automatic control system, only by changing brick mould, you can produce all kinds of hollow blocks, interlocking bricks, paver bricks, cement brick, fly ash bricks, concrete blocks and so on.

What should be noted when using an automatic hydraulic brick making machine:
1. In the production of automatic brick making machine, the mold is important as it directly affects the quality of the bricks. During the production process, it is necessary to ensure the cleanliness and tidiness of the mold, and to inspect it regularly. If the mold is worn, it must be replaced to ensure the quality of the finished bricks. When replacing the mold, it is necessary to ensure that it is suspended with a rope, and the installation of the brick making machine equipment should be chosen in an open area to shorten the loading cycle of the loader. The brick making machine should also guarantee convenient turning for the transportation vehicles of the finished product, without interference.

2. When preparing the prefabricated foundation, it is necessary to ensure its flatness and meet the dimensional requirements, so that the installation of the hydraulic brick making machine equipment can be more secure. The quality of the foundation directly affects the normal use and effective service life of the brick making machine equipment.

3. Before using and installing, it is necessary to carefully read the equipment instruction manual, familiarize oneself with the structure, operation mode, and control method of each component, and make sure to take necessary safety measures.

4. The hydraulic brick making machine equipment uses a hydraulic system, so it is important to keep the machine clean and free from impurities. Before use, the oil level must be checked, and during use, clean oil should be added following the procedure to prevent iron filings and other substances from entering the oil tank and damaging the hydraulic system.

5. Every day when the automatic hydraulic brick making machine equipment is shut down and production is stopped, the equipment should be cleaned inside and outside to ensure its cleanliness and tidiness.